Contact Us

Our Products

NCTHL
NCTHL
The AIDA Linepacer NCTHL Material Handling Robot is a two-axis servo motor controlled press to press transfer system for multipurpose lines offering simple, high speed feed with less shock
  • Product Description

Outline

The AIDA Linepacer NCTHL Material Handling Robot is a two-axis servo motor controlled press to press transfer system for multipurpose lines offering simple, high speed feed with less shock.

Direct feed between presses shortens the length of the line and can also be used along with intermediate-stage (1/2 feed) operations.

Direct feed also reduces capital investment costs versus systems with multiple robots installed between presses.

Multi-step processing can be used thanks to a variety of feed strokes which are usable in a single line.

Blanks and coils can be used.
 

Advantages

  1. The feed stroke can be specified.
  2. Direct feed between presses shortens the production line.
  3. The lift stroke can be specified.
  4. The height of the feed bar can be specified.
  5. The speed can be increased by varying the lap motion of the feed/lift axes.
  6. The feed direction can be changed between left to right and right to left (option).
  7. OD display and data bank make programming easy.
  8. An intermediate escape down function prevents interference with upper dies.
  9. Equipment features a rapid start-up sequence to improve productivity.
  10. Records up to 99 different types of feed patterns which can be selected at a glance from the control panel during the operation.
  11. Sequential starts and stops are possible, eliminating the need to arrange the workpiece into stages.
 

Specification

Model NCTHL-150/10-[A][B] NCTHL-300/10-[A][B]
Feed Stroke (mm) 700~900 1000~1200 1300~1500 1600~1800 1900~2400 2500~3000
Lift Stroke (mm) 20~60 (Variable 20~100)) Note 1 20~60 (Variable 20~100)) Note 1
Feed Direction [B] [L]: Left to Right - [R]: Right to Left
Conveyance Weight Limit (Weight + Clamp) (kg) Max. 3.0 Max. 3.5 Max. 4.0 Max. 4.5 Max. 5.0 Max. 6.0
Numbers Of Presses In Line [A] units Max. 6 units (8 units for direct feed line) Max. 6 units
Clamp Method Vacuum Or Magnetic (Mechanical Clamper)
Drive Type Two-Axis (Feed/ Lift) Servo Drive
Electric Drive Motor Note 2 Feed (kW) 15 (22)
Lift (kW) 5.5 (7.5)
Power Supply (V x Hz) 200 / 220 x 50 / 60
Air Pressure Requirements (MPa) 0.5
Cycle Time Note 3 (sec.) 2.0~2.1 2.1~2.5 2.6~2.9 3.0~3.2 3.3~3.7 3.7~3.8
Note 1: Option.
Note 2: Feed motor and lift stroke is determined by conveyed weight and operational conditions.
Note 3: Cycle Time is affected by stroke length.
 
 
Used Presses