Our Products > High Speed Automatic Press > Hypromax HMX High Speed Press

Our Products

Hypromax HMX High Speed Press

Able to run at optimum speed continuously for long hour

Ask AIDA

Product Description

Outline

Able to run at optimum speed continuously for long hour.

Oil tank and suitable gap are set in the rotating part and the slide parts.

Adopt complete automatic lubrication system, reducing the maintenance cost while improving machine accuracy as well as the stability of long-hour high speed working.

Roll Feeder is installed to realize even accurate feed during high speed working, increasing production output while cutting down material costs.

Advantages

Highly rigid frame and 8 point slide guide to prevent inclination, making highly precise forming possible
High speed processing technology perfected through years of experience and engineering
3000kN working capacity and wide processing range (2300mm)

Specification

Model			HMX-1250	HMX-2000	HMX-3000	HMX-3000W
Capacity		(kN)	1250	2000	3000	3000
Tonnage Rating Point (Above D.B.C)		(mm)	3.2	3.2	3.2	3.2
Stroke Length		(mm)	30	30	30	30
Working Energy: Min.-Max. spm		(J)	1200/1200	2000/2000	3000/3000	3000/3000
Strokes Per Minute Under No Load		(spm)	200~800	200~600	160~500	120~410
Micro-inching		(spm)	About 60	About 60	About 60	About 60
Die Height, Slide To Bolster		(mm)	380~430 ^{Note 1}	400~480 ^{Note 1}	420~520 ^{Note 1}	420~520 ^{Note 1}
Slide Adjustment		(mm)	40	50	60	50
Slide Area (L.R. x F.B.)		(mm)	1300 x 600	1700 x 650	2000 x 750	2260 (2300) x 1000 ^{Note 6}
Bolster Area (L.R. x F.B.)		(mm)	1300 x 850	1700 x 950	2000 x 1000	2300 x 1200
Bolster Thickness		(mm)	160~210 ^{Note 2}	180~260 ^{Note 2}	200 ^{Note 3}	200 ^{Note 3}
Bolster Surface Height Above Floor		(mm)	(1000) ^{Note 4}	(1000) ^{Note 4}	(1000) ^{Note 4}	(1000) ^{Note 4}
Max. Upper Die Weight		(t)	0.5	0.9	1.3	1.5
Side Opening (F.B. x Height)		(mm)	350 x 380	460 x 400	560 x 420	560 x 420
Bed Opening (L.R. x F.B.)		(mm)	1100 x 280	1500 x 350	1700 x 400	1800 x 420
Main Motor		(kW)	30	45	55	55
Power Source		(V/Hz)	200/50,60 ^{Note 5}	200/50,60 ^{Note 5}	200/50,60 ^{Note 5}	200/50,60 ^{Note 5}
Required Air Pressure		(MPa)	0.5	0.5	0.5	0.5
Applicable Feeds	RCF-15F		O	-	-	-
	RCF-25F		O	O	O	O
	RCF-35F		-	O	O	O
Applicable Scrap Cutter	Capacity	(kN)	200 or 40	40	40	40
Applicable Scrap Cutter	Width	(mm)	150 or 250	250 or 350	250 or 350	250 or 350
^{Note 1} Please select die-height within the range shown below
^{Note 2} Bolster thickness is decided by die height
^{Note 3} Die-height of HMX-3000 and HMX-3000W are set by column base. Bolster thickness is fixed
^{Note 4} Bolster surface height is reference value
^{Note 5} Power source outside of 200V is acceptable as option
^{Note 6} The value in () indicates the area for tool change

Used Presses