Our Products > Transfer Equipments > NCTHL

Transfer Equipments

NCTHL

TE003

The AIDA Linepacer NCTHL Material Handling Robot is a two-axis servo motor controlled press to press transfer system for multipurpose lines offering simple, high speed feed with less shock

Ask AIDA

Product Description

Outline

The AIDA Linepacer NCTHL Material Handling Robot is a two-axis servo motor controlled press to press transfer system for multipurpose lines offering simple, high speed feed with less shock.

Direct feed between presses shortens the length of the line and can also be used along with intermediate-stage (1/2 feed) operations.

Direct feed also reduces capital investment costs versus systems with multiple robots installed between presses.

Multi-step processing can be used thanks to a variety of feed strokes which are usable in a single line.

Blanks and coils can be used.

Advantages

The feed stroke can be specified.
Direct feed between presses shortens the production line.
The lift stroke can be specified.
The height of the feed bar can be specified.
The speed can be increased by varying the lap motion of the feed/lift axes.
The feed direction can be changed between left to right and right to left (option).
OD display and data bank make programming easy.
An intermediate escape down function prevents interference with upper dies.
Equipment features a rapid start-up sequence to improve productivity.
Records up to 99 different types of feed patterns which can be selected at a glance from the control panel during the operation.
Sequential starts and stops are possible, eliminating the need to arrange the workpiece into stages.

Specification

Model			NCTHL-150/10-[A][B]			NCTHL-300/10-[A][B]
Feed Stroke		(mm)	700~900	1000~1200	1300~1500	1600~1800	1900~2400	2500~3000
Lift Stroke		(mm)	20~60 (Variable 20~100)) ^{Note 1}			20~60 (Variable 20~100)) ^{Note 1}
Feed Direction [B]			[L]: Left to Right - [R]: Right to Left
Conveyance Weight Limit (Weight + Clamp)		(kg)	Max. 3.0	Max. 3.5	Max. 4.0	Max. 4.5	Max. 5.0	Max. 6.0
Numbers Of Presses In Line [A]		units	Max. 6 units (8 units for direct feed line)				Max. 6 units
Clamp Method			Vacuum Or Magnetic (Mechanical Clamper)
Drive Type			Two-Axis (Feed/ Lift) Servo Drive
Electric Drive Motor ^{Note 2}	Feed	(kW)	15 (22)
	Lift	(kW)	5.5 (7.5)
Power Supply		(V x Hz)	200 / 220 x 50 / 60
Air Pressure Requirements		(MPa)	0.5
Cycle Time ^{Note 3}		(sec.)	2.0~2.1	2.1~2.5	2.6~2.9	3.0~3.2	3.3~3.7	3.7~3.8
^{Note 1:} Option.
^{Note 2:} Feed motor and lift stroke is determined by conveyed weight and operational conditions.
^{Note 3:} Cycle Time is affected by stroke length.

Used Presses