computer Desktop View
© 2024 - All rights reserved.
Our Products  >  Coil Feeders > LFA-L

Coil Feeders

LFA-L

LFA-L

CF003
4.6 inch HMI displays operational status and maintenance information for reduction of hours of work   3-languages operator display is standard.(English, Japanese ,Chinese)   The straightener feeder entrance is equipped with lever lock-type side guides and the uncoiler is equipped with side-type guides, and both types can be adjusted without using any tools
  • Product Descriptionkeyboard_arrow_down

    • Outline
    4.6 inch HMI displays operational status and maintenance information for reduction of hours of work

    3-languages operator display is standard.(English, Japanese ,Chinese)

    The straightener feeder entrance is equipped with lever lock-type side guides and the uncoiler is equipped with side-type guides, and both types can be adjusted without using any tools

    Zigzag Feed Function (Optional equipment) reduces scrap and lowers cost
     

    Advantages
    Model that accommodates material from 300mm to 600mm wide and up to 3.2mm thickness
    1. Easy Handling: Equipped With lever lock-type side guides and the uncoiler is equipped with slide-type side guides and both types can be adjusted without using any tools
    2. Easy Setting: Work roll pressure adjustments are possible even during production. Includes standard hold-down pressure calculation function
    3. Easy Adjustment: The passline height can be easily adjusted by using hydraulic jack, and contributes to shorter set up times and better quality
    4. Easy Cleaning: The large access apertures on the top and bottom make it easy to clean the work rolls, which effectively helps prevent scratch-marks on the material
     

    Specification
    Straightener Feeder
    Models LFA-L3 LFA-L4 LFA-L5 LFA-L6
    Material Width mm 50 - 300 50 - 400 50 - 500 50-600
    Material Thickness mm 0.3 - 3.2
    Feed Length mm 1 - 400
    Feed Length Variation mm ± 0.2
    Max. Feed Speed m/min. 16
    Release Responsiveness spm 80/120(When using advance angle Feature)
    No. Work Roll   Upper 3 [5] rolles & 1 pilot roll/ lower 3 [5] rolls
    Work Roll Diameter mm ø 48
    Feed Roll Diameter mm ø 66
    Pass line Heignt mm 1050 ± 100
    Main Motor kW 1.8
    Strightener Speed m/min. 1.8 - 18.0 2.2 - 22.0
    Power Source Capacity   220V/220V 5.4kVA or 380V/400V 5.9kVA
    Use Power Supply V 200/220 or 380/440
    Require Air Pressure MPa 0.5
     
    Uncoiler
    Models LE-2E4 LE-2R4 LE-1E6 LE-1R6
    Coil Weight kg 2500 2500 1500 1500
    No. of Coil   1 2 1 2
    Max. Material Width mm 400 400 600 600
    Min. Material Width mm 50
    Max Coil O.D. mm ø 1200
    Coil I.D mm ø 508
    Drum Expansion/ Contraction Method   Manual
    Uncoiler Drive Motor kW 0.75
     
     
    Used Presses
© 2024 - All rights reserved.